Introduction：ABS new environmentally friendly laser engraving material has passed UL certification (94-HB level), RoHS-compliant, and the effect of laser engraving is comparable to the printing effect. It has been
ABS new environmentally friendly laser engraving material has passed UL certification (94-HB level), RoHS-compliant, and the effect of laser engraving is comparable to the printing effect. It has been widely used in electronic information products that require engraving, such as computer keyboard products.
| Properties | ASTM | Test Condition | Units | Typical Values |
| Mechanical | ||||
| Tensile Strength | D638 | 50mm/min | MPa | 46 |
| Elongation | D638 | 50mm/min | % | 7 |
| Flexural Strength | D790 | 1.3mm/min | MPa | 75 |
| Flexural Modulus | D790 | 1.3mm/min | MPa | 2350 |
| Impact Strength, IZOD notched | D256 | 3.2mm, 23℃ | J/m | 65 |
| Rockwell Hardness | D785 | R-Scale | - | 110 |
| Thermal | ||||
| Heat Distortion Temp | D648 | 1.8MPa | ℃ | 80 |
| 0.45MPa | 92 | |||
| Vicat Softening Temperature | D1525 | 1Kg, 120℃/h | ℃ | 102 |
| 5Kg, 50℃/h | 95 | |||
| Electrical | ||||
| Volume Resistivity | D257 | - | Ω ● cm | 1016 |
| Dielectric Strength | D149 | - | KV/mm | 22 |
| Others | ||||
| Melt Flow Rate | D1238 | 200℃, 5Kg | g/10min | 1.8 |
| Specific Gravity | D792 | 23℃ | - | 1.11 |
| Mold Shrinkage | D955 | 23℃ | % | 0.3-0.6 |
| Flammability | UL94 | 1.5mm | Class | HB |
| 3.0mm | Class | HB | ||
CN
EN
JA
RU
IT
DE
FR
Message
0769-86019595
